[Vwdiesel] New Headgasket and Headbolt Issues

[Stephen Kraus]

Pulled the head....found the problem.

the Snap wasn't the threads....it was the block. Have a hairline crack
running from the oil return at #1 cylinder left corner through the bolt hole
and to the water jacket port.

Welp, this block is done. BUT since I cannot afford another one right now
and I have nothing to lose, I'm going to try to JB weld it. Its not a high
pressure coolant system and the crack is only on the oil return, so not much
pressure there. What do I have to lose?

On Sun, Jun 27, 2010 at 6:50 AM, Jack Carr <jcarr222 at comcast.net> wrote:

> I believe it is 204-4701.  Best deal is at Summit.
>
>
> On Jun 26, 2010, at 11:22 PM, Stephen Kraus wrote:
>
> Got a question: Anyone have the part number for the ARP studs?
>
>



-- 
______________________________
Stephen Kraus
UB3RATL4Sf00 at gmail.com;