[Vwdiesel] Fuel pump sprocket removal

[Bud S]

Yep, the old wedge the screw drivers behind the sprocket and whack the 
shaft trick worked like a charm.

Thanks all,
Bud

LBaird119 at aol.com wrote:
>   It does take a bit of a whack to knock it loose and I usually use 
> a couple of large blade screwdrivers and/or pry bars wedged in behind 
> the sprocket to preload it.  A couple hits like you're driving an 8p nail 
> usually does it.  Without the preloading it often won't come off.  Be 
> sure to leave the nut on and set flush with the end of the shaft just 
> in case you don't hit it dead center (which usually doesn't happen).
>     Loren
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>