[Vwdiesel] 1.9D pump install / injector hard line issues

[Roger Brown]

Bryan;

On this engine, what injectors are you running?  Are they recycled 1.6D or TD injectors?
If so, I assume you had no issues with the new #1/#2 lines screwing onto them?  Had one 
person comment that the 1.9 factory lines only fit 1.9 injectors:

> they dont make factory lines to run a 1.9 pump on 1.6 injectors..
> all the 1.9 lines i know about, are made for tall injectors, and long delivery valves..

Not sure if that is referring to TDI injectors or the old IDI versions.



On 4/22/2011 9:59 AM, Bryan Belman wrote:
> Roger, where did you find this pump. I have the same one on my 1.9NA motor now in the van,
> have been running this pump for about 1.5 years now.
> I broke down and purchased new lines for #1 and #2. for the 1.9NA TD setup. I was able to
> rebend #3 and #4 from my old 1.6NA stock of injector lines.
> I do not have the part #'s handy but I bet I could look in my old files on a computer at
> home to find them. VAGCAT, I would look up a 96 to get the part #s
> This may work for you, log into vagcat first then hit this link.
> http://www.vagcat.com/epc/cat/vw/POC/1996/165/49/1948039/
> This is the injector pipes for the 1Y engine we have. Seems like there are pipes for
> motors with AC and not. I do not remember the L at the end of part # so I am guessing I
> ordered the pipes that ended in B.
> *10* 	*_028130301B_* <javascript:;>
>
> 	
> pressure pipe
> cylinder 1 /
> *(10)* 	*_028130301L_* <javascript:;>
>
> 	
> 	
> pressure pipe
> cylinder 1 / air condit.: 1Y
> *11* 	*_028130302B_* <javascript:;>
>
> 	
> pressure pipe
> cylinder 2 /
> *(11)* 	*_028130302L_* <javascript:;>
>
> 	
> 	
> pressure pipe
> cylinder 2 / air condit.: 1Y
>
> I did not consider swapping the injector connector nipples as I call them, on the back of
> the pump.
>
> Bryan Belman, Pt. Pleasant, NJ


-- 

   Roger