[Vwdiesel] Raceware studs

[Roger Brown]

On 8/10/2011 7:39 PM, Brian and Ruth Decker wrote:
> Hi Folks;
>
>                  I have installed a set of Raceware head studs in my 11mm 1.6
> block and I don't know what the torque spec is any more. Help me is you can.
>
> Brian Decker

 From my 2007 post:

My Raceware studs recommend 3 step torquing to 50 ft.lb. (engine oil for lube) then run
the engine to temp, cool down and re-torque to 50 ft.lb. again.  Compared to torquing the
stretch bolts, the studs are a real pleasure to tighten.



-- 

   Roger