[Vwdiesel] Dial indicator

Erik Lane eriklane at gmail.com
Thu Jun 30 18:21:13 PDT 2011


Sorry about the delay in getting back to you. The shank on my dial indicator
is indeed 8mm, and the length of the shank is ~15-16mm. (My calipers can't
quite get the exact measurement, but that part isn't nearly as critical as
the correct diameter.)

Is there anything else that anyone would like to know about it?

Erik

On Fri, Jun 17, 2011 at 9:14 PM, raymond greeley <rgreeley2 at hotmail.com>wrote:

>
> I am interested in hearing your info erik, on the dial indicator as i am
> wanting to purchase one in anticipation of an IP bracket change.ray
>
> > From: tgott at hotmail.com
> > To: vwdiesel at vwfans.com
> > Date: Fri, 17 Jun 2011 20:45:29 +0000
> > Subject: Re: [Vwdiesel] Dial indicator
> >
> >
> > Interesting. That one looks and works differently yet the end outcome is
> the same. I don't know if it helps but the one I got is from Parts Place. I
> don't plan on spending that much for a gauge yet untill I need it so it is
> up to my brother to find it since he has my gauge and he needs it but hasn't
> bought one. Thanks for the help folks.
> > Travis G
> >
> > > Message: 1
> > > Date: Fri, 17 Jun 2011 10:01:31 -0700
> > > From: Erik Lane <eriklane at gmail.com>
> > > To: LBaird119 at aol.com
> > > Cc: vwdiesel at vwfans.com
> > > Subject: Re: [Vwdiesel] IP leak
> > > Message-ID: <BANLkTi=rC-dUn0cfG-hGg9Fg_q3BKDdBnw at mail.gmail.com>
> > > Content-Type: text/plain; charset=ISO-8859-1
> > >
> > > Well, I just looked through the dial indicators on there, and I'm not
> sure
> > > how to tell if some of them will work. According to one I found, it
> looks
> > > like you need an 8mm shank for the adapter to fasten to. But it might
> depend
> > > on which adapter you have. I see there are a couple of variations. I
> have
> > > the adapter as shown in this auction:
> > >
> http://cgi.ebay.com/ebaymotors/4-Diesel-Timing-Tools-VW-Audi-Volkswagen-Volvo-Bosch-_W0QQcmdZViewItemQQhashZitem588e6e8728QQitemZ380346730280QQptZMotorsQ5fAutomotiveQ5fTools
> > >
> > > That is also where I saw that you would need an 8mm shank. I don't have
> my
> > > tools where I am now, but either tomorrow or Sunday I'll be back there
> and
> > > can measure things on mine if that would help anything.
> > >
> > > Erik
> >
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>


More information about the Vwdiesel mailing list