[Vwdiesel] Removing Turbo Oil Supply Line

[James Hansen]

Wiggle it a bit, the end of the pipe inserts into the fitting.  The fitting
you see on the turbo is to adapt an npt threaded hole to accept a flared
fitting.. well, a compression fitting actually, with a steel ferrule on the
pipe.  The pipe fits quite snug into the adapter fitting and the ferrule has
as step on it IIRC Dave.
-james

-----Original Message-----
From: vwdiesel-bounces at vwfans.com [mailto:vwdiesel-bounces at vwfans.com] On
Behalf Of Dave Cook
Sent: May-14-11 10:23 PM
To: TDI-Conversion Group; Audi-VW-Diesels Group; VW Diesel Group
Subject: [Vwdiesel] Removing Turbo Oil Supply Line

Pulling the head off of an '02 Jetta TDI, ALH engine.

One of the final steps is removing the turbo oil lines.  I am having a hard
time getting the oil supply line off/out.  I undid the flare nut, but the
line won't lift out of the turbo.  

Is it just stuck and needs some wiggling, or do I need to remove the little
fitting that the flare nut attaches to?  If so, how?  I couldn't easily get
a wrench on it.

Thanks,  

Dave Cook
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel