[Vwdiesel] PD Cam

[mikitka]

Bryan,

You can use http://www.blackstone-labs.com/free-test-kits.php to send your
oil sample off. They will send you a kit, you don't pay until you send in
the oil sample.  The cost is $25.00 plus postage to their lab which is
around $3.45 IIRC.  Basically when you go to change your oil, just pull the
plug, let it drain for a few seconds and then fill up the sample bottle they
send you. Fill out the form they have and either you can put a check in with
it or put it on a CC and they will e-mail you back the results.

I also use Terry Dyson at
http://www.dysonanalysis.com/servicelist/premiumkits129.html but he is a
little expensive. I use him because he gives a complete test of everything
and also sends back an MP3 file reviewing the PDF file he sends you. So it
is like you are talking to him in a way and the in depth explanation he
gives is worth it to me and not just a one paragraph note.

Nick

Wow, I am starting to lose sleep over this BEW or PD cam issues.
Now you say the buckets that hold the unit injectors are going to be mushed
up as well and I could start to see fuel in the oil, ahhhhhhhhhh
 
I guess the next time I am up to change oil I need to send an oil sample off
for testing.
Any suggestions on where to send it and HOW?  Nick, I know you have a place,
but how do you send it and how much.
 
could you give me some contact info please.
 
 

Bryan Belman, Pt. Pleasant, NJ
04 Jetta Wagon TDI PD, 100hp, 5sp -- running :<)
92 Jetta 1.6 Eco-Turbo Diesel, 5sp -- running :<)
82 Diesel Westy 1.9NA -- running :<)
70 Type 1 stock Elm Green Beetle -- Under Restoration :-)