[Vwdiesel] Priming a pump

Andrew .Libby libbybapa at gmail.com
Sat Apr 28 21:27:34 PDT 2012


I use a spare IN bolt in the Out bolt hole along with a spare IN fitting
and an outboard primer bulb.  It pulls the fuel right through the filter
and pump.  Once there is a smooth flow I replace the OUT bolt and fitting
and without cracking the injectors it typically takes 10-20 seconds of
cranking to fire up.

On Sat, Apr 28, 2012 at 8:45 PM, Stephen Kraus <ub3ratl4sf00 at gmail.com>wrote:

> Open the return fitting and trying cranking, it SHOULD help pump it
> through.
>
> On Sat, Apr 28, 2012 at 9:34 PM, <cosborn at epix.net> wrote:
>
> > What is the best way to prime my bosch pump?  I have fuel in the line
> from
> > the filter to the pump, but I do not get any fuel to the injectors when
> > cranking even after I loosened the injector pipes.  Should I pour some
> fuel
> > into both fittings (inflow and return)?
> > Craig
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>


More information about the Vwdiesel mailing list