[Vwdiesel] general brake question
    Roger Brown 
    r.c.brown at ieee.org
       
    Mon Jul  9 15:01:48 PDT 2012
    
    
  
I've found sometimes I get grabbing or sticking brakes when the pads are worn down, maybe 
not to the wear indicator but close.  My guess on what is happening is that the caliper 
pistons are extended out rather far and then when the pads get pulled my the rotor, that 
causes the pistons to get cocked in the caliper bore a little bit and get stuck 
momentarily.  When I have run into that, a new set of pads seemed to clear up that braking 
issue.
On 7/9/2012 2:57 PM, Chris Geiser wrote:
> Doesn't sound like rotors to me, but I don't know what it sounds like...
> On the old ones, I would have guessed low vacuum or leak in the vacuum
> line, but not sure on tdi's.
>
> Wish I could be more help.
>
> CG
> **sent with mobile device
>   On Jul 9, 2012 3:42 PM, "Bryan Belman" <dieselwesty at yahoo.com> wrote:
>
>> my brakes have been grabbing as of late on the Jetta TDI when braking
>> lightly, when you hit the brakes harder, they do not grab.
>>
>> Is this rotors, that would be my guess.
>> I have never changed them, they have never been cut, 150K on car.
>>
>> Was thinking Raybesto Adv. Technology rotors for $42 shipped to my house.
>> ??
>>
>> I need to pull the front wheels tonight and have a look before ordering
>> something I may not need.
>>
>> Bryan Belman, Pt. Pleasant, NJ
-- 
   Roger
    
    
More information about the Vwdiesel
mailing list