[Vwdiesel] intermediate shaft pulley

[Bryan Belman]

I think I still have the original one from my 1.6NA engine Scott, with the edges.
But, having a small section of the edge broken off is no big deal.  The new pulley has no edges.
just make sure it is not to sharp.
 

Bryan Belman, Pt. Pleasant, NJ
04 Jetta Wagon TDI PD, 100hp, 5sp -- running :<)
04 Golf TDI PD, 100hp, 5sp Tiptronic Auto -- running :<)
82 Diesel Westy 1.9NA -- running :<)
70 Type 1 stock Elm Green Beetle -- Under Restoration :-)
 

________________________________
 From: "lbaird119 at aol.com" <lbaird119 at aol.com>
To: salex at dsalex.org; vwdiesel at vwfans.com 
Sent: Thursday, April 25, 2013 12:39 AM
Subject: Re: [Vwdiesel] intermediate shaft pulley
  


  Good luck finding one.  JB the piece back.  Some don't have the shoulder so you could grind it all off but I'd try a little JB, you can build it up a tad on the outside so that the inside stays smooth and even since the belt will likely rub on it.
    Loren



-----Original Message-----
From: Scott Alexander <salex at dsalex.org>
To: vwdiesel <vwdiesel at vwfans.com>
Sent: Wed, Apr 24, 2013 5:42 pm
Subject: [Vwdiesel] intermediate shaft pulley


We managed to break the edge on the intermediate shaft pulley for my '82 1.6D.  
oes anyone know of a source for these are happen to have a spare with which 
hey are willing to part?  Part numbers is 068 115 021A.
Thanks,
cott Alexander
arren, NJ
_______________________________________________
wdiesel mailing list
wdiesel at vwfans.com
ttp://www.audifans.com/mailman/listinfo/vwdiesel

_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel