[Vwdiesel] Rabbit 1.9 TD aaz clutch

[lbaird119 at aol.com]

Not sure there but That's the clutch we put in Dad's Passat when it started slipping due to the bigger injectors and next step chips.  Still doesn't with the bigger exhaust.  :-)
     Loren



-----Original Message-----
From: Travis . <tgott at hotmail.com>
To: Stephen Kraus <ub3ratl4sf00 at gmail.com>; vwdiesel <vwdiesel at vwfans.com>
Sent: Wed, Sep 4, 2013 8:54 pm
Subject: Re: [Vwdiesel] Rabbit 1.9 TD aaz clutch


Would that fit the smaller input shaft from a rabbit diesel? 

Travis 
 



Date: Wed, 4 Sep 2013 15:15:00 -0400
Subject: Re: [Vwdiesel] Rabbit 1.9 TD aaz clutch
From: ub3ratl4sf00 at gmail.com
To: tgott at hotmail.com; vwdiesel at vwfans.com


VR6 clutch maybe?
On Sep 4, 2013 2:14 PM, "Travis ." <tgott at hotmail.com> wrote:

I have replaced the pressure plate on my 1.9 TD aaz engine in my rabbit but 
wasn't able to find a 210 mm friction plate with the small tranny input shaft. 
Anyone have any ideas? I can't use the full power of my engine as it slips and 
it is starting to get old fast. I am tempted to buy a 200 mm kit/flywheel 
included. If I do that-anyone know of any good kits? Since I use that car to 
haul family it is loaded more then most vehicles and with the added HP of the 
larger engine I want a clutch that will last.
Travis

_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel
 		 	   		  
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel