[Vwdiesel] seeking experience

[Bryan Belman]

My 1.9NA head was converted to use that standard 1.6 valve cover.I fought with oil leaks for years.I found it to be an issue with the cork valve cover and the rubber cap that goes over the cam shaft bearing hump in the front of motor.I then started using a dab of gasket sealer on each side to keep the ears of the cork gasket into the orange rubber thing.not sure if you mean the standard rubber 1.6 - 8 stud type of the 1.9TD 3 center hold down type.
 Bryan Belman, Pt. Pleasant, NJ
04 Jetta Wagon TDI PD BEW, 100hp, 5sp -- running :<)
04 Golf TDI PD BEW, 100hp, 5sp Tiptronic Auto -- running :<)
82 Diesel Westy 1.9NA 1Y -- running :<)
70 Type 1 Beetle -- Under Restoration forever:-)
      From: Ralph Meyermann <ralphmeyermann at gmail.com>
 To: raymond <rgreeley2 at hotmail.com> 
Cc: VW Diesel Group <vwdiesel at vwfans.com> 
 Sent: Thursday, June 11, 2015 11:27 AM
 Subject: Re: [Vwdiesel] seeking experience
   
Possibly cam seal? Mine was leaking from the can seal with the appearance
of a valvecover gasket leak
On Jun 11, 2015 7:30 AM, "raymond" <rgreeley2 at hotmail.com> wrote:

> rapid fire:my 1.9 non tdi td is leaking oil at the valve cover, standard
> rubber ok, is there a need for metal reinforcement.
> seeking an intercooler temp exchanger
> adding gauges:oil press, coolant, alt from an 86 cabri, looks fairly
> straight forward though block oil sensor may be an issue
> i have a turbo gauge, though think i should add an egt gauge any
> experience with summit parts.
> 90 passat wagon, 1.9 td,
> i do have a 93 wagon body that i will offer up later this summer,any
> interest here, i am in chicago.
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel


>
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel