[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 4 terminal coolant temp sensor

To: quattro@swiss.ans.net
Subject: Re: 4 terminal coolant temp sensor
From: Vladimir Entin <ventin@hns.com>
Date: Thu, 11 Aug 94 10:04:31 EDT
In-Reply-To: Your message of "Wed, 10 Aug 94 19:54:13 EDT." <01HFR8I4F3PE9S5KU8@vms.cis.pitt.edu>
Reply-To: quattro
Sender: quattro-owner

I'm going to replace control arm bushings and front struts cartridges 
on my Audi 5000CS '86. As far as I know the press needed to replace
bushings. What kind of device you was using?. Have you managed to do it
having car on floor stands or you have more advanced lifting equipment?
How long it takes?. Did you replace front strut cartridges and what it
takes in regard to equipment, time?.

-Vladimir

Follow-Ups:
- replacing control arm bushings & struts
  - From: David Erickson <davide@Rational.COM>
- Re: 4 terminal coolant temp sensor
  - From: "Richard Tang" <richy@iastate.edu>

References:
- Re: 4 terminal coolant temp sensor
  - From: JDYST@vms.cis.pitt.edu

Prev by Author: High Speed driving
Next by Author: replacing control arm bushing and struts
Prev by thread: Re: 4 terminal coolant temp sensor
Next by thread: replacing control arm bushings & struts
Index(es):
- Author
- Thread