[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Anti-lock brakes



You should check all of the wheel sensors... loosen the mounting bolt and
see if you can push them in any further (even 1/16" makes a difference).
Also, check them with a DVM to see what the resistance is. Mine are about
1100 ohms. The connectors for the front ones are under the hood. I'm not
sure where back ones are. While you have the meter connected, shake the
cables and GENTLY tap the sensor. The meter reading may change indicating
a problem.
Good luck, 
           Mel