Re: Air/fuel mixture meter hookup

[rdh@genrad.com (Robert D. Houk)]

   I tapped into the O2 wiring where the sensor harness connects to the computer harness, under the hood.
   It's got that little black bootie over it. I used a very small guage wire and run it inside via one of
   the heater-hose holes, along with the temp, oil press and knock-sensor wires. Easy. Though I paid like
   $65 for a _Camden Superchargers_ O2 display unit.....

The "stock" wiring is a shielded cable for the O2 sensor - did you continue
with a shielded wire, or use unshielded?

					-RDH