[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Multi-function sensor woes....
- To: quattro@swiss.ans.net
- Subject: Re: Multi-function sensor woes....
- From: zm@mhcnet.att.com (Zafer Mehmood [209])
- Date: Mon, 26 Sep 1994 15:44:53 +0500
- Original-From: mhcnet!zm (Zafer Mehmood [209])
- Original-To: swiss.ans.net!quattro
- Reply-To: quattro
- Sender: quattro-owner
>
> Oh, and one other thing, lately my car has been stumbling pretty
> bad when cold. I was poking around looking for vacuum leaks when
> I brushed against the oil dipstick. It was pretty loose in the
> tube. So I pulled it out, and there are 3 or 4 grooves in the
> top plastic piece but only one groove had a little rubber donut
> on it. Are they all supposed to have rubber donuts on them ?
> If the answer is yes I hate to think they went into to the
> engine......Yikes! Guess I'll do that oil change tonight......
>
The dipstick on my '87 5000 TQ also has only one rubber o-ring seal on it.
Seems like that is normal, unless someone else knows otherwise.
Zafer
-----------------------------------------------------------------
Zafer Mehmood AT&T Bell Laboratories
zm@mhcnet.att.com Murray Hill, NJ