Re: Factory service bulletins and parts micro-fiche

[Scott=John=Mockry%Mktg%TM@banyan.bv.tek.com]

Peter,

I purchased a used 1984-88 5000T parts micro-fiche from the Audi parts 
dept and can read the fiche using a regular reader. The problem as you 
have mentioned is the size difference. I have been considering the idea of 
carefully cutting the large parts fiche in half so I fit it into my 
existing reader that I use for the factory bulletins.
Scott M.

Peter Orban <ORBAN@nrcamt.iamt.nrc.ca> Wrote:
| 
| 
| >The micro-fiche bulletins for all Audi vehicles 1985-89 is 
| $25 and the
| >1990-92 are $15. Used micro-fiche readers are available at 
| surplus
| >stores for $20-30.
| 
| I do have the microfiche for the parts for my 4000SQ and for 
| my other
| VWs, I got them at the Audi dealer for $5.00 a piece, but it 
| sure looks
| different than the microfiche we get from the library. The 
| fiche is a
| lot bigger, about 8.5x11, and the figures seem to be reduced 
| to a smaller
| size. Has anyone tryed using a regular reader for VAG fiches?
|