Returned mail

[MAILER-DAEMON@ncrgw1.attgis.com]

Your mail could not be delivered because of the following reason:


   ----- Transcript of session follows -----
Executing: /usr/bin/uux - -gI  ncrhub4!rmail (columbiasc.ncr.com!daniel.adams)
uux failed ( -1 )
server "/usr/bin/uux" failed - unknown mailer error 1

   ----- Unsent message follows -----
>From quattro Tue Jan 31 13:21:00 EST 1995 remote from swiss.ans.net
Received: by swiss.ans.net id AA11523
  (5.67b/IDA-1.4.4 for quattro-outgoing); Tue, 31 Jan 1995 13:40:35 -0500
From: bur.dmcc.com!qa3 (Stott Hare)
To: delphi.com!audidudi ('AudiDudi'), swiss.ans.net!quattro ('Quattro')
Subject: 85 4000 distributor clamp with shield
Date: Tue, 31 Jan 95 13:21:00 EST
Message-Id: <2F2E83EC@bur.dmcc.com>
Encoding: 22 TEXT
X-Mailer: Microsoft Mail V3.0
Sender: quattro-owner@swiss.ans.net
Reply-To: quattro@swiss.ans.net


AudiDudi et al.
   I noticed this as well.  I worked on a friends 84 4000Sq and his 87 
4000CSq.  The 84 was just a typical 13mm bolt on the hold down clamp, but 
when we went to adjust the 87, we found that stupid rivet like thing holding 
a cover down.  We managed to bang the cover enough to swivel it out of the 
way and get at the actual bolt.  Funny thing was, this rivet thing wasn't a 
rivet.  It actually threaded into the dist. clamp.  We managed to get it out 
with a pair of vice grips.  Never cease to be amazed at some of audis 
stranger engineering feats...

 -Stott
________________________________________

From: AUDIDUDI@delphi.com
Date: Mon, 30 Jan 1995

This past Saturday, while I was changing plugs and plug wires, I decided to
bump the timing as I did with my '85 4000.  I was surprised to see that the
distributor was not readily adjustable (I had to chisel off a rivet holding
a cover over the distributor clamp bolt) but pleased with the results ... I
wonder if I'll be able to get away with this come summer?