Re: SEAT HEATER SWITCH

[Robert Phillips <r3rfp@dax.cc.uakron.edu>]

On Tue, 28 Feb 1995, Lebens, Rick J wrote:

> Also, (unrelated) what tool do you use to crimp the bands that hold 
> the CV joint boots on?  A pliers, end cutter  or is there something 
> better.

I have used a big pair of cutters/pliers and found that they work fine.  
If you must have a special tool, an auto parts store can provide you with 
one at a moderate cost.  The only difference between cutters and the tool 
is that the tool has no blades, thus reducing the chance that you could 
cut through the clamp while tightening it.  
			---Bob