[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Rod bolts - Questions

To: Bruce Bell <bbell@csn.net>
Subject: Re: Rod bolts - Questions
From: Rolf Mair <waves@epix.net>
Date: Tue, 2 May 1995 22:04:06 -0400 (EDT)
cc: quattro@coimbra.ans.net
In-Reply-To: <199505022232.AA18310@ns-1.csn.net>
Sender: quattro-owner@coimbra.ans.net

On Tue, 2 May 1995, Bruce Bell wrote:

> Bentley says to always replace the rod bolts with new streatch bolts. 
> 
> Do 4000Q's ('87) use this style bolt, or is it just a recommended replacement?
> 
> Anyone know how much they cost for a set of 10?

If the engines already apart, it's cheap insurance to replace them. The 
oem ones are good replacements but I preffer using the raceware rod 
bolts. They are reusable and are nearly bulletproof.
r.mair

References:
- Rod bolts - Questions
  - From: bbell@csn.net (Bruce Bell)

Prev by Author: Re: Splitfire /ignition systems
Next by Author: Re: Splitfire /ignition systems
Prev by thread: Rod bolts - Questions
Next by thread: Accurate Speedometer
Index(es):
- Author
- Thread