[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Help Needed...Change Diff Adjustment
- To: quattro@coimbra.ans.net (Non Receipt Notification Requested) (IPM Return Requested)
- Subject: Re: Help Needed...Change Diff Adjustment
- From: glen.powell@smc.com
- Date: 04 May 1995 11:09:12 -0400
- Autoforwarded: FALSE
- Importance: normal
- P1-Content-Type: P2
- P1-Message-Id: US*ATTMAIL*SMCLAN;X400ATT May 04 11:09:11 1995
- P1-Recipient: quattro@coimbra.ans.net
- Priority: normal
- Sender: quattro-owner@coimbra.ans.net
- Ua-Content-Id: 110911040595
- X400-Trace: US*ATTMAIL*SMCLANarrival 04 May 1995 11:09:12 -0400action Relayed
The center diff lock servo is usually mounted to the transaxle on the
pass side (4000Qs). You may be able to best access it by removing the
pass front wheel and looking/reaching through an access hole you will see
inside the wheelwell. Simply remove the two vacuum lines and reinstall
them on the opposite connectors. Be carefull not to break the connectors,
they are plastic, as is the body of the servo. That's it!
-glen