[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: stuck high-beam, pilot-bearing etc

To: sjagernauth@attmail.com (Stephen I Jagernauth)
Subject: Re: stuck high-beam, pilot-bearing etc
From: Wm Stott Hare <stott@ccs.neu.edu>
Date: Thu, 11 May 1995 08:57:00 -0400 (EDT)
Cc: quattro@coimbra.ans.net
In-Reply-To: <wsfATT-2.5.1-sjagernauth-1402> from "Stephen I Jagernauth" at May 10, 95 05:21:24 pm
Sender: quattro-owner@coimbra.ans.net

> On to the questions:
> 
> I have the classic broken headlight switch stuck on high-beam, before I tear 
> into the steering column, for those of you who've BTDT, can this be fixed 
> short of a replacement?  The car failed inspection for this and I'd prefer not
> spending $150 for a used one so I figured since it's already broken, I can't 
> do any worse damage...
> 
> Steve Jagernauth	               	'87 951 Pearl Black 
> AT&T BCS			  	'87 Audi 5K CST 
> Bridgewater, NJ 
> sjagernauth@attmail.com


Does anyone know (off hand) if the switches from an early model will swap
with the newer 5000's?  What are the years where switch/connector designs
changed?

TIA,
Stott Hare
stott@ccs.neu.edu

References:
- stuck high-beam, pilot-bearing etc
  - From: sjagernauth@attmail.com (Stephen I Jagernauth)

Prev by Author: Re: Factory exhaust systems?? ACK!
Next by Author: Re: Rattling Cat box
Prev by thread: stuck high-beam, pilot-bearing etc
Next by thread: Re: stuck high-beam, pilot-bearing etc
Index(es):
- Author
- Thread