re: '85 ur-Q engine mounts?

[Dave Lawson <dlawson@ball.com>]

glen,

The motor mounts I now have installed in my 83 ur-q are the Heavy Duty 5000 
Turbo with A/C motor mounts. I forget, but maybe there is even a diesel 
thrown in the description also. When I had all my mounts changed a few years 
ago, these were the most heavy duty ones available. After checking with 
another ur-q owner, these are what he is currently installing in his car. 
His description/part numbers of the mount are the same as mine. Make a note 
to check the fiche on these. When you install these mounts you need the 
spacer , rubber cup and metal head shield for the turbo side mount. 
Otherwise it won't last. The spacers are critical to get the proper engine 
ride height.

The mounts I have are marked as I have previously described. They have a 
large aluminum cup type base with 2 bolt hole ears, the hydraulic rubber 
center section rises up like a "mountain", as you describe. Mine are holding 
up fine after 2 years 15k miles and mulitiple track events.
 -
Dave Lawson  dlawson@ball.com
86 coupe GT
83 TQC - now lhasa green and awaiting the 200 engine installation