Re: Thermostats (was Termostats :-) )

[LToy@aol.com]

Jason Douglas writes about oil coolers:

>without drilling, cutting, etc.  You run lines from the adaptor to 
>cooler you mount in the air stream (in front of the engine or the 
>radiator).  Some versions of this hardware let you mount the oil filter 

The factory has a nifty location for the '91 200q 20v oil cooler:  low, up
front, passenger side (well below the headlight)  Ducting from the
below-bumper outboard grill leads directly to the cooler.  this keeps the
heat extracted from the oil out of the radiator air stream.  plus:  very
short lines to the oil filter adapter from here.

--Linus
LToy@aol.com