Re: Schrappnel Knobben(tm) parts

[ptimmerm@mashtun.jpl.nasa.gov]

I have most of the parts together for the Schrappnel Knobben(tm).
Note this is NOT my trademark.  I think it belongs to Glen Powell.
I am putting together six systems, and five are spoken for so far.
The kit includes regulators, hose barbs, a plug where the guage port 
would be, and hose clamps.  The system is set up for 7/16 vacuum line 
available at your local auto store.  I though I'd leave that to the 
individual. Some purists might insist on cloth covered hoses (or even 
funny little german hose clamps for that matter).  Here's the only rub 
so far. The regulators can be panel mounted, but the jam nuts were 
missing. They require a 1 3/36 nut with 16 tpi.  I can't get that at the
local hardware store or McMaster-Carr.  Anyone else have a source?
I am almost up to ten dollars in parts per kit. aauuuDDDIIII!!!!

paul t-