Re: Where is BAR Measured?

[PDQSHIP@aol.com]

Bar is measured at the back/top of the manifold on the 86> tq's and is not
the same as the bar measured by the wastegate......   If you really want a
thrill, take the hose from the computer feed and put it at the feed for the
WG......  Lots of error codes at the dash but the boost is awesome........
  Regarding the IC hose of Graydons.....  The smoother hose will give you
more cfm and a cooler charge at the intake, which are the two variables of
boost pressure......  The stock accordian is not efficient for anything other
than the rocking of the motor, that hose is key to the flow/temp of boost
pressure.....   Graydon has the right idea, the execution needs only a little
work.....  keep your boost up and stay cool.........   


More than thinkin


Scottt