QTC/other quattros?: Drive-shaft axial bearing number

[steveb@newkla.kla.com (Steven Buchholz)]

Well, I looked in my toolbox this morning and found that I kept the 
original axial bearing, so I am quite certain that I have the right 
number :)

The original bearing was made by INA with a part number of: 6006RSR

The replacement was made by FAG and had a few more numbers on it (at 
least the box had more numbers):

	6006.2RSR.T.C3

BTW - for those of you who do not know this already, even though
Audi considers the unit to be a single replaceable module and thus
will not sell repair parts, I have found it to be quite rebuildable,
with parts readily available.  I posted a rebuild procedure quite
some time ago but I haven't seen it in the archives as yet.  Send
me direct e-mail if you would like a copy.  Caveat ... this was
done on an '83 QTC, but from looking at the driveshaft on the '88
5000 it looks like it may still apply, but YMMV.

Hope this helps!

Steve Buchholz
s_buchho@kla.com
San Jose, CA (USA)