Re: Tune up

[esw5@cornell.edu (Ernest Wong)]

{from Glen Powell]

>  Those RF shields are part of the plug wire, just pull 'em off. Then -
>  BEFORE you remove each plug, use a shopvac to vacuum the area around the
>  plug. After I break 'em loose and back 'em out a few turns I vac 'em
>  again, all to prevent any crap from falling into the cylinder when you
>  R/R the plugs.

I'm even more anal. I bought a can of compressed air ( the stuff sold for
computer and photo supply) and blasted the area around the plugs to get all
the insects, monetary donations etc. out of the plug recess.

Ernest Wong
esw5@cornell.edu