[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: 1 change to 60
>I forgot to include this in my last post.
>
>Yes, I am actually only doing one gear change to 60mph! The tire/wheel
>combo I have on the car is only 0.10 in. smaller than stock, so I feel
>that the gauge is fairly acturate. Anyway, I hit 60 (according to the
>gauge) at about 6300rpm. I'm still making power at this rpm and This was
>at 13psi of boost. I am assuming I could do it sooner if I were running
>22psi (this is where I run when I have race fuel in the tank). All the
>gearing is bone stock. Who ever knows if VDO gauges are accurate though?
The gauge is not accurate, with your present gearing, which is shorter
than stock with you shorter tires the car will only do 55-56 mph on the
Rev limiter, Sorry but that's the way that it is! You can check your
Speedo against mile makers on the highway at 60 on your speedo it should
take about 63 secs.
Later!
Eric Fletcher
'87 5KCSTQIA2RSR2B
STEADI RIC@aol.com