[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Schricky testing
In a message dated 95-11-29 12:54:21 EST, you write:
>
>The Schrick cam might actually hurt 30-70 times by killing the low-end.
50-70
>
>or 60-70 might be a very different story.
>
>-glen
>
>
If you read Roberts post that 10sec with Schrick/S4/Polished head was with
10-11psi of boost, with the 2 bar setting he was mid 8's, and that is very
good so far folks, and expected frankly...... The nice thing about a 30-70
run is that the low and the high end grunt is factored in........ Using this
to isolate the S4 lowend "advantage" vs the RS2 high end advantage.......
Depending on the Schrick used, the times will actually be worse, cuz the
stock cam is tuned pretty well for the turbos...... I have a 272 on my
beast and the stock on my wife's, and so far hers is the faster at developing
low end torque, but hit 3200 and mine will scream.......
Scott