Re: More on TQC HP

[STEADIRIC@aol.com]

>My boost gauge easily goes to 2.0 bar now, but I dialed it down a little 
>to 1.9 or so, until I get a better boost gauge, so I know exactly where I 
>am. (one is on the way...I hope) After that, Ill know.  
>Also playing with mixture settings, but more mechanical than electrical 
>for now, but that will be fixed too. :)

Be VERY, VERY Careful here my dash gauge is reading .3 bar LOW, and this 
is confirmed by my Aircraft Manifold Pressure Gauge.


Later!

Eric Fletcher
'87 5KCSTQIA2RSR2B

STEADI RIC@aol.com