Re: S6 toolkit clip

[ets@wrkgrp.com (Edward T Spire)]

>From: sk0ph@cadvision.com (Perci Hala & Sandra Krystalowich)
>Date: Tue, 09 Jan 96 20:26:17 MST
>Subject: S6 toolkit clip
>
>Little orange plastic guy? My S4 had one and I was told it was for
>removing the plug wires. Never tried it though.


>From: Daniel Hussey <GY3WSX@UNIVSCVM.CSD.SCAROLINA.EDU>
>Date: Tue, 09 Jan 96 23:39:21 EST
>Subject: S6 toolkit clip
>
>     Daves right,
>
>         That little plastic clip in your S6 toolkit is for removing the fuses,
> although you can just pull them out by hand....that's what I do!

No, guys, I know what that is, and it's not in the toolkit on the new
S6, it's in a little well next to the fuse block in the side of the
dash, which you can only get to when the driver's door is open.

This is a metal wire bent roughly into the shape of a U (more like an
open pear shape) and the ends of the wire are bent at 90 degrees, in
the same direction, for about a quarter of an inch.  It's in the pouch
with the jack and other tire changing stuff, along with a reversible
screwdriver and an open end wrench.


=========== When you believe in things you don't understand, ===========
=========================== then you suffer ============================
Ed Spire                                    Voice: 708-696-4800 ext 69
The Workstation Group                       Fax:   708-696-2277
6300 River Road, Suite 501                  Email: ets@wrkgrp.com
Rosemont, Illinois, USA                     Web:   http://www.wrkgrp.com