Re: front struts THE EASY WAY

[PDQSHIP@aol.com]

In a message dated 96-03-23 15:59:52 EST, you write:

>100% from under the hood.  Just remove the top plate from the strut (3 nuts)
>Mark their position but plan on having a front end or four wheel alignment
>performed when your done.  Remove the upper nut from the shock. Then using
>the aforementioned tool loosen the nut that holds the cartridge in the
>strut.

Invaluable tool, I was able to do the swap AT the alignment shop in 15minutes
for BOTH sides, when I was told one of the struts was bent and time was
running short....  Proper toolage on this project saves all the money you
spent for the tool, esp if your time is worth anything

Scott