Re: TQC alignment(was Dunlop SP8000 need

[dlawson@ball.com (Dave Lawson)]

> Do you have a problem with your tires wearing out the inside tread first? 
 I
> had the TQC alligned, but the shop said that the caster and camber were 
out
> of specs. and could not be adjusted.  The Bentley manual confirmed this.
> Have you had to deal with this?

You might want to check this again. Camber is adjusted by loosening
the two bolts which hold the ball joint in the control arm. The bolts 
holding
the ball joint move in elongated holes. Sliding the ball joint away
from the car yields more negative camber.
 -
Dave Lawson  dlawson@ball.com