[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Driveshaft removal tool
In a message dated 96-04-11 02:09:04 EDT, you write:
>
>Howdy all,
>
>Just wanted to check and see if anybody knew the part number or had a good
>description of the
>12-point bit that is used to seperate our driveshafts from the transmissions
>and wheels.
>
>Thanks much!
>
>Gary
>
>
The triple-four is used at the front driveshafts is a 10mm, the 6mm hex is
used at the rear driveshaft...
Scott