[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Starship rotors & Drilling

To: Bob.Damato@snetel.com
Subject: Re: Starship rotors & Drilling
From: STEADIRIC@aol.com
Date: Mon, 15 Apr 1996 22:53:38 -0400
cc: cbernard@bcsdcpost.gbcsdc.att.com, quattro@coimbra.ans.net
Sender: owner-quattro@coimbra.ans.net

>If drilled properly, you are allowing them to cool quicker. The thermal 
>mass loss is insignificant compared to the cooling gains you get from 
>drilling them.

That is a pretty big "IF" and to top it off Heat craks are going to 
happen ALOT easier on these brakes because they run "Just" a little 
hot.... If they did'nt we would'nt be worring about cross drilling 
them.....

>That one gets a little Bzzt. :)

Backatcha babe!  :^)

Later!


Eric Fletcher
'87 5KCSTQIA2RSR2B

STEADIRIC@aol.com

Prev by Author: Re: Starship rotors & Drilling
Next by Author: Into the Pound.....
Prev by thread: Re: Starship rotors & Drilling
Next by thread: Re[2]: Starship rotors & Drilling
Index(es):
- Author
- Thread