[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
rear wheel bearings, install tip
Last night I installed new rear wheel bearings and seals on both sides of
my '87 5KCST. (Girling disc brakes.) Got a tip from my parts supplier that
may be old hat to some of you, but was new to me, so I thought I'ld pass it
on.
After you get the old races out of the hub, cut a slot in them. (I used a
4.5 inch angle grinder.) Use the old races as the 'drivers' to install the
new races. The slot will let the old races compress, you can remove them
with a screwdriver once the new races are properly seated. Worked well for
me.
Tip came from a guy at World Wide Auto Parts, Madison, WI.
Jerry Fields
UWW T&IR #1327 Dod #1697
'83 XS 400 Maxim '87 SR5 4x4 '87 5KCST '83 Tercel
'74 SL433F '73 440 Chetah '73 Olympic 335
Whitewater, Wisconsin