[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Questions on my Q
Hi guys,
A few days ago someone posted the procedure for initializing
the diagnostic on the climate control system. Does anyone
care to share what the codes should read and what
trouble codes are in reference to ? I got mine to work
and ran thru all 23 codes; while accessing each number
I pressed the cold button and either a 00 or a 2 or 3 digit
number appeared. What the heck does this mean? Any
help in reading the numbers would be greatly appreciated !
Also, when I press the auto button on the climate control for
heat, ( yes it's still cool here in Iowa) it blows thru the defroster
vents only; A/C the same. Doesn't matter if it's on econ; bi level
still blows out defroster . I noticed the a/c pump cycles also.
I believe this is normal in defrost mode anyway. Trouble with
vacuum servo? leaky hose? suggestions?
Next is minor but important to me, the dumb temp gauge won't
work. Thought it might be one of those little temp senders in the
block, pulled them out, seemed ok to me. Any suggestions ?
Last question, anyone know of a good source for subframe bushings?
Has anybody done the replacement themselves? Doesn't seem like a
huge undertaking, comments and opinions welcome.
Thanks for reading and any help. Much obliged !
Until next time,
Keith Bidne
Ft Dodge, IA
87 5kTQ (my new project)
Funny for the day:
Research shows the most common cause of car sickness is
still the sticker price in the window.