Rebuilding the MC's

[PDQSHIP@aol.com]

In a message dated 96-05-09 22:37:09 EDT, you write:

>Hey, I'll take you up on that - I really don't like the looks of my brake
>fluid (or the reservoir - kinda cruddy) - plan on having someone pressure
>bleed it (not wanting to experience the dreaded clutch drop or fight with
>air in my ABS) - but I know its an eventuality... Every once in a while the
>clutch likes to 'catch' on something.

Pretty easy really, just get the mc and the slave off the car and compress
the cylinder (beware, brake fluid!) then remove the circlip, all parts will
come out....  Get some fine sandpaper and a dowel twist hone the cylinder
bore LIGHTLY to remove the scoring, then  put some brake fluid in the bore,
put new spring, piston with seal, (rubber boot on slave with new arm) and
replace circlip...  Takes about 1/2 hour to do both....

HTH

Scott