[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

dgenetti inside hex



if you just need the tool for this job why not find a bolt with a
corresponding head size to fit the hex and weld or braze a nut on its shaft.
that way you can place the hex head in the socket of the part to be removed
and use a wrench on the fixed nut to undo.
mike m audi 4ooos x2.
Cyclops Bicycles
Ph. (604) 545-5644 Fax (604) 545-1167
michael_mulholland@mindlink.bc.ca