Re: Removal of speed limiter

[frontstage <frntstg9@allinux1.alliance.net>]

JEFDO@aol.com wrote:
> 
> Ned sends detailed instructions for both removal of computer and speed
> limiter.
>      Under the computer you will now see a piece of wiring with a receptacle
> on the end with a plug stuck in it. The whole thing is held in place by a
> plastic clip. Carefully pull this plug and receptacle. This is the engine
> coding connector. Pull out the plug and put the receptacle back under the
> plastic clip. Lay the plug on the floor of the of the plastic compartment so
> that you can find it when you want to plug it back in ( like selling it to
> someone putting H rated or lower tires on it).
>      Warning: You must use Z rated tires!!! Make sure its legal in your area.
> 
> It sure is nice not to get thrown forward when the speed limiter cuts you off
> (fuel pump?)  at full throttle at 127-8!!
> 
> Hasta,
> 
> Jonathan Fenton
> '93 S4sIA3 speed limiter off.
> 
> P.S. No cops here in Vermont before 7AM when I make that QUICK 37 miler to
> work.
will this work for the 96 A4Q?