V8Q Door Panel Removal

[cobram@channel1.com (Cobram)]

 bruce@pwi.com (Bruce Romero) inquires:

 BR> Does anyone know the procedure for RnR ing the door panels
 BR> on the V8. I have some "stick" or tight feeling door handles 
 BR> and know from the list that I better get some grease on the
 BR> inner linkages and pivot points. 

 BR> I pulled the edges out away from the door and loosened the 
 BR> socket head screw at the front of the door handle but I did
 BR> not want to force anything and break something real expensive.
 BR> The panel was still firmly attached.

 BR> I would greatly appreciate any clues, TIA

     I've had the panel off to replace a broken lock. If
     memory serves me right, there should be 2 or 3 allen
     head screws in the armrest. I think they're 4mm or
     maybe 5mm. You'll have to force the allen into the
     holes, as the foam has a tendency to "bloat" in the
     hole, making a visual search for the screw impossible.

     Aside from this, I don't remember any other "gotcha's".

     BCNU

     Cobram@Channel1.Com

     90 V8Q
     84 5KS



... We're lost, but we're making good time.

---
 * Blue Wave/QWK v2.20 [NR] *