Re: Deceleration Valve

["Paul C. Waterloo" <74543.407@CompuServe.COM>]

> Hi all,
> 
> through a little further investigation on my part of the problem I have
> with the 200 dying on deceleration, I have found out that it might be
> the "deceleration valve" (I was told this by a dealer mechanic). Does
> anybody know what it does, where it is, how I can possibly test it and
> if it can be replaced as an individual part? (Whew.)
> 
> Thanks (in advance).
> - - peter, peterhe@microsoft.com
>   91 200qw

Peter-

Looked through my Bently on the fuel injection section, it does not make mention
of a "deceleration valve" as you describe. It is not listed in the components of
the system. There is the throttle potentiometer which has the idle switch
integrated in it. 

I'm somewhat familiar with fuel injection systems, can't seem to cross reference
anything to a "deceleration valve" for the 3B engine.

For all of you with the CIS system on the MC engine, it does have a
"deceleration cut off valve" component mounted to the air filter housing.

Paul

91 200 q

**************************************************************
Paul Waterloo                    TEL: (860) 267-7714
HydroAire Incorporated           FAX: (860) 267-7387
875 Old Hartford Rd
Colchester, CT  06415          EMAIL: 74543.407@compuserve.com
**************************************************************