Re: Still looking for elec window circuit diagram... part du

[treilley_at_BANKMARK@conseco.com (treilley)]

     Door handles are removed with metric hex key(about the same size as 
     the hole).  The bolts don't actually come out;  you just loosen them 
     about 1/4 in.  There is also a screw behind the door release handle 
     when you pull it out as if you were opening the door.  And there might 
     also be a screw in the door jam.  Next remove the brackets that held 
     the door handle on.  After all this, the door panel lifts up about 1 
     in and then comes off.
     
     I missed your original post.  What is it that you are trying to do?  I 
     have done a lot of mechanical and electric work in my doors and may be 
     able to help you further.
     
     Tim NJ 90CQ, 77Spitfire