[Fwd: Re: No power at 4200 RPM]

[Michael Ryan <mryan@adan.kingston.net>]

Hello Folks;
 Thanks for the answers.
 Sheffield Corey responded with the following and was dead on.
 
> >         Is it possible that the bellows hose from the intercooler to the intake
> > plenum has blown out on the bottom? Or maybe a hole in the intercooler itself
 
 One of the bellows had a 2" crack in it.
 Replaced bellows and blast off reached again happily at 1.6.
 
 One more questions in regards to this topic.
 Why does my waste gate not bleed off excess turbo instead of shutting
 off the fuel?
 As in earlier discussions it should reach max and then hold that level.

TIA
 --
> Michael Ryan              Cell: (613) 541-8585
> Ryan Computer Services    Fax:  (613) 634-3567
> Kingston, Ontario         Email: mryan@adan.kingston.net
> Canada  K7M 6L9           Http://www.kingston.net/iknet/ryan

-- 
Michael Ryan		  Cell:	(613) 541-8585
Ryan Computer Services	  Fax:	(613) 634-3567
Kingston, Ontario	  Email: mryan@adan.kingston.net
Canada  K7M 6L9           Http://www.kingston.net/iknet/ryan