Re: BTCC A4 replica R/C model...

[Steve Verona <vrona@infinet.com>]

AUDIDUDI@delphi.com wrote:
> 
> The following is an excerpt from a post on the Touring Car mailing list ...
> I edited the non-Audi content but thought this might be of interest.  I bet
> Steve Verona already has one on order!

I just hung up the phone;-)  You guys really need to ask your local hobby 
shop if there is a club racing these touring cars and then go watch them 
race.  It looks very real as the cars slide around and rub one another.  It 
is the most realistic RC racing there is.  The other classes do not look 
scale at all... too fast, too stuck, and too little suspension movement.

I am taking my gas powered 1/10 scale car with me to nationals with really 
tall gearing... can you say 90mph?  If only I could autox it;-)
> 
> * * * * * * * *
> 
> On that note Parma has just release a COMMODORE HOLDEN 1/10 body too!!
> Tamiya is issuing a complete kit with their new TA03 belt drive 4wd =
> chassis of the BTCC Audi A4 , and a FWD RC kit of the 96 Volvo 850
> Anyone fimilaiar with Tamiya will know that these will be scale replica =
> accurate to every last sponsor decal.
> 
>      _             _
>     / l       l o l  \       l o   Jeffrey Goggin
>    /__l l l / l l l  l l l / l l   * * * * * * *
>   /   l l_l \_l l l__/ l_l \_l l   AudiDudi@delphi.com
> 

-- 
Sincerely,

Steven Verona, Vice President
DB-Net, Inc.   614-436-6565 ext 15