Re: help - oil press. switch

[Andrew Duane USG/PE <duane@zk3.dec.com>]

> Help! I need to replace the oil pressure switch - the one that activates the
> idiot light/buzzer - since mine seems to be generating spurios signals. 
> Where is it?????  I thought is was on the back of the Cylinder head....no,
> that was a coolant temp sensor (oops).  This is a 1982 coupe, good ole l5
> normally aspirated injun.  Anybody got a used Bentley? (book not car)

According to Mr. Bentley, the 1.8 bar switch (that controls the buzzer)
is in the middle of the block, most of the way down to the bottom.

I find it about 3" under the 4 rings stamped into the block
under the #3 (center) spark plug. I think this is the high-pressure
one. The low pressure one is on the side of the pan below.

-- 

Andrew L. Duane (JOT-7)			duane@zk3.dec.com
Digital Equipment Corporation		(603)-881-1294
110 Spit Brook Road
M/S ZKO3-3/U14
Nashua, NH    03062-2698

Only my cat shares my opinions, and she's too heavy to care.