re:temperatures

[mjs <info4mjs@snet.net>]

Hi:

I've been reading the thread on wiring for high heat applications.  I've 
always had success in using teflon coated multi strand wires for all 
applications.  It is commonly available (or should I say most 
economically) at Hamfests or Amateur radio flea markets.  I use several 
strands in parallel for higher current applications.  I had an electric 
pump in my '83urQ for pre-oiling the turbo and the wire(s) lasted for 7 
years ( I suspect the current owner has no problems) and the wire never 
discolored which indicates it was not over heated.

Hope that is informative for someone.

Mike Stricker
1990 Quattro Coupe
1984 4kq