[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: 80Q engine - Interference?
Hairy green toads from Mars made Bruce Bell say:
> > From: Andrew Duane USG/PE <duane@zk3.dec.com>
> > Common wisdom is that the 10V NA engine is non-interference.
> > However, I just got back from my shop, who assures me that the
> > 10V engine will bang/bend if going fast enough....
>
> The low compression NA 10V (pre '88 except for '87 coupe) are non
> interference, BTDT (at speed). With the NF motor compression went from
> 8.5:1 to 10:1 and intake valves got bigger 38-40mm. I wouldn't bet on that
> engine being non-interference.
Ahh, that explains why my mechanic warned me about replacing it.
My car has the NF motor with 10:1 and the bigger valves. The belt
was also in *really* bad shape, and was off anyway getting my oil
pump replaced. So there was no labor, just $30 for the new belt.
I'm happy again (except for the bill from yesterday's work....)
--
Andrew L. Duane (JOT-7) duane@zk3.dec.com
Digital Equipment Corporation (603)-881-1294
110 Spit Brook Road
M/S ZKO3-3/U14
Nashua, NH 03062-2698
Only my cat shares my opinions, and she's too heavy to care.