Seat heater relay madness (was 9020V)

[Bryan Gunn <bgunn@voicetek.com>]

Hi,

A loose or broken solder joint in the seat heater switch can cause the seat
heater relay to go nuts and click rapidly. The bad solder joint causes inter-
mittent contact - like you are rapidly turning the heated seat on and off.
Does the relay click when you adjust the seat heater switch? For example,
turning the seat from 6 to 1 sould not cause the relay to click at all.
Sometimes just touching the switch causes the relay to click.

Replaced mine with a junkyard part out of an '87 4ksq. $5 and it works 
great. Illuminates better too.

Later,
-- 
******************************************************************************
*            Bryan Gunn                  Email: bgunn@voicetek.com           * 
*            Voicetek Corporation          Tel: 508.250.7998                 *
*            19 Alpha Road                 Fax: 508.250.9378                 *
*            Chelmsford, MA  01824                                           *
******************************************************************************